admin@web
Barney Navarro-built Rambler turbo Indy motor
12-14-2025 Written by Tom Jennings (in 2005), edited by Frank Swygert On 14 July 2005 the remaining contents of Navarro Engineering's shop in Los Angeles (Glendale) was auctioned off, almost...
Rear axle bearing replacement
written by Tom Jennings, edited by Frank Swygert 03-08-2026 These are basically my personal notes to myself, expanded into a how-to. I have no pictures for this page; I only...
Replacing AMC/Rambler inline six motor mounts
Written by Tom Jennings 23 Apr 2020, edited by Frank Swygert 02-02-2026 Luckily motor mounts only need replacing every ten (or more) years, because it's generally a PITA. They are...
AMC and Rambler dash & door knob removal
written by Tom Jennings, edited by Frank Swygert 02-02-2026 Why is it that automotive instrument cluster, knobs, levers, cranks, dials, etc are so weird and strange? It's unbelievably difficult to...
Tom’s 1963 Classic 550 Wagon
written by Tom Jennings circa 2007, edited 12-1-25 by Frank Swygert. Some links go back to Tom's site, www.ramblerlore.com Considering I've had this car since 1989, it has very little...
1963 Rambler Station Wagon Rear Side Window R&R
by Tom Jennings, edited by Frank Swygert 01-26-2026 Frank: Tom used this method on his 64 Classic wagon in 2002. All Rambler/AMC station wagons use similar rubber, so this method...
AMC/Rambler Bellhousings
by Tom Jennings, edited by Frank Swygert 01-26-2026 Not done yet, but getting there. Numeric dimensions will follow. Send me your bellhousing data and I'll add it! I NEED: A...
Home-Made 1970-up AMC Spring Compressor
by Tom Jennings, edited by Frank Swygert 01-25-2026 As you'll find out when you go to do the job, it's difficult to find a spring compressor that actually fits 70-up...
Aftermarket A/C installation
Written by Tom Jennings August 2008, edited by Frank Swygert 02-02-2026 This isn't a complete how-to, it's a somewhat complicated job, but this should cover the high points of retrofitting...
58-63 American Wheel and Tire fit issues
by Tom Jennings, edited by Frank Swygert 01-26-2026 This is an old car. The original wheels were 15 inch diameter and four inches wide; it came from the factory with...